Установка модема

Операционные системы *nix: Linux, FreeBSD и др. ПО для них.

Установка модема

Непрочитанное сообщение Shar » 24 янв 2007, 11:28:01

Народ, кто знает как установить внутренний модем Acorp Prime под Линукс, дрова я скачал с офф. сайта и что теперь делать? И еще в этих дровах стоит ограничение на скорость, я вроде нашел как его убрать, но надо открыть один файлик и заменить цепочку символов, но чем открыть его можно? Помогите!
Shar
Опытный
Опытный
 
Сообщения: 157
Зарегистрирован: 27 июн 2006, 08:07:15
Откуда: Курск

Установка модема

Непрочитанное сообщение Гость » 25 янв 2007, 11:23:03

Есть сайт
http://www.linuxant.com/drivers/hcf/dow ... atches.php
про этот тип модемов. Там же есть патч под свежие ядра.

Открыть - в любом текстовом редакторе. Например kwrite или mcedit.
Гость
 

Установка модема

Непрочитанное сообщение Shar » 13 фев 2007, 15:53:58

Ну что начнемс. Поставил я значит Mandrake 10.1, начал ставить по инструкции:
METHOD C: TAR PACKAGE (*.tar.gz)

If you have obtained the driver package in tar format:

1. extract the package with "tar -xzf hcfpcimodem-{version}.tar.gz"
("tar -xzf hcfusbmodem-{version}.tar.gz" for the USB version)

2. change to the package directory with "cd hcfpcimodem-{version}"
("cd hcfusbmodem-{version}" for the USB version)

3. run "make install" from the top of the package directory.

4. run "hcfpciconfig" ("hcfusbconfig" for the USB version) to complete
the installation and configure your modem.

Дошел вроде нормально до 4 этапа, далее ввожу hcfpciconfig и:
[root@localhost sasha]# cd hcfpcimodem-1.11full
[root@localhost hcfpcimodem-1.11full]# hcfpciconfig
Conexant HCF controllerless PCI modem driver, version 1.11full

If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/

When reporting a problem for the first time, please send
us the file generated by "hcfpciconfig --dumpdiag".

No pre-built modules for: Mandrake-10.1 linux-2.6.8.1-12mdk i686

Trying to automatically build the driver modules…
(this requires a C compiler and proper kernel sources to be installed)
Please install the 'kernel-source-2.6.8.1-12mdk' package. You can install
it with the 'urpmi kernel-source-2.6.8.1-12mdk' command.

Where is the linux source build directory that matches your running kernel?
[/usr/src/linux] urpmi kernel-source-2.6.8.1-12mdk

WARNING: missing file urpmi kernel-source-2.6.8.1-12mdk/include/linux/autoconf.h
The cause of this is usually a missing or unconfigured
kernel source tree (and sometimes an incorrect directory or symbolic link).

First, ensure that the proper kernel source and compiler packages
from your distribution vendor and/or the community are installed.

The Linux kernel can then be reconfigured by running "make menuconfig"
under the kernel source directory (usually /usr/src/linux).

Verify that the proper options for your system are selected.

Then compile and install your new kernel (for more information about
this procedure, see the README file under the kernel source directory),
reboot the system using the new kernel, and re-run "hcfpciconfig".
[root@localhost hcfpcimodem-1.11full]#


Что делать, я как понял у меня проблемы с ядром? помогите чайнику…
Shar
Опытный
Опытный
 
Сообщения: 157
Зарегистрирован: 27 июн 2006, 08:07:15
Откуда: Курск

Установка модема

Непрочитанное сообщение Caratel » 23 фев 2007, 11:26:03

В школе поставили ALT Linux 2.3 Junior. И вот вопрос, как там настроить локальную сеть и модем, эээ, модем,,, кароче нет через кабель))) Объясните плиз, чё делать?
Caratel
 

Установка модема

Непрочитанное сообщение Гость » 11 дек 2007, 11:36:01

2 Два вопроса первый как настроить модем в лине через ик связь :? а то чтот ничего путного не получилось и 2 Как настроить модем в Unix (Frenzy free bsd) икак с ним там работать*TIRED*
Гость
 


Вернуться в Unix

Кто сейчас на форуме

Зарегистрированные пользователи: AhrefsBot [Bot], GoGo [Бот], SEMrush [Бот], Trendiction [Бот]

cron